Guide Library
Seasonal
Beginner
1-2 days

Winter Lay-Up Checklist: Haul-Out to Cover

Lay-up goes wrong when jobs are done in the wrong order or forgotten entirely. Work through this checklist from haul-out to cover and nothing gets missed. For the detail on each engine and water-system step, read the full winterising guide.

Sailing cruiser on stands in a boatyard under a fitted winter cover

Tools and materials

  • •Pressure washer or hose and scraper
  • •Non-toxic propylene glycol antifreeze
  • •Fuel stabiliser and diesel biocide
  • •Fresh engine oil and filters
  • •Smart battery charger
  • •Breathable cover, frame and tie-downs

1. Haul-out and hull

Pressure wash the bottom as soon as she comes out, while the growth is still soft. Scrape off barnacles and check the hull for blisters, cracks and weeping fittings.

Check the anodes and replace any that are more than half gone. Look over the rudder, propeller, shaft and cutlass bearing for play and damage.

Open the drain plug if she has one, and leave it out all winter.

Read the full guide

Sign up free to read the remaining 5 steps. 30-day free trial, no card needed.

Frequently asked questions

In what order should I winterise my boat?

Wash the hull first while growth is soft, then engine and fuel, then water systems and heads, then batteries, then the interior, and cover last. Doing the cover first traps you into climbing in and out all autumn.

Should seacocks be left open or closed over winter?

Ashore, leave them open so any trapped water drains and cannot freeze in the valve. Afloat, leave them closed and make sure the bilge pump and float switch work. Either way, leave a note at the helm.

Do I need to remove the batteries for winter?

Not if you can keep them on a smart maintenance charger. A fully charged battery will not freeze; a flat one will. If there is no power at the boat, take them home and charge monthly.

Advice here is general guidance only — see our disclaimer. Need a professional? Browse local trades.